ANALISIS PENGARUH VARIASI FRAKSI VOLUME SERBUK KULIT KACANG TANAH TERHADAP KEKUATAN TARIK KOMPOSIT MATRIKS POLIESTER

Authors

  • Shofwan Jawahirul Umam
  • Alva Solla Nabia
  • Dilla Rofiqiya Universitas Islam Negeri Maulana Malik Ibrahim Malang
  • Rahmad Verdianto
  • Utiya Hikmah

DOI:

https://doi.org/10.22437/jop.v11i2.51825

Keywords:

Poliester, Kekuatan Tarik, Komposit, Serbuk Kulit Kacang, Fraksi Volume

Abstract

Kebutuhan akan material berbobot ringan dan ekonomis mendorong pemanfaatan limbah lignoselulosa kulit kacang tanah (groundnut shell powder - GSP) sebagai filler penguat dalam komposit matriks poliester. Penelitian ini bertujuan menganalisis pengaruh variasi fraksi volume serbuk kulit kacang tanah (0%, 1%, 3%, dan 5%) terhadap kekuatan tarik komposit. Spesimen dibuat menggunakan teknik pencetakan manual dan diuji dengan Universal Testing Machine (UTM) sesuai standar ASTM. Hasil menunjukkan bahwa komposit poliester murni (0%) memiliki kekuatan tarik tertinggi (5.378 MPa). Namun, penambahan filler pada fraksi rendah (1% dan 3%) secara drastis menurunkan kekuatan tarik (menjadi 0.954 MPa dan 1.091 MPa) karena distribusi yang tidak merata dan pembentukan stress concentrator. Peningkatan fraksi volume hingga 5% menghasilkan peningkatan kekuatan tarik paling signifikan menjadi 2.644 MPa dan menunjukkan regangan maksimum tertinggi (6.428%). Temuan penting ini menyimpulkan bahwa fraksi volume 5% merupakan komposisi optimal yang mampu memfasilitasi transfer tegangan dan memberikan keseimbangan terbaik antara kekuatan dan keuletan pada komposit berbasis limbah.

Downloads

Download data is not yet available.

References

Agarwal, B. D., Broutman, L. J., & Chandrashekhara, K. (2018). Analysis and Performance of Fiber Composites. Wiley.

Asim, M., Jawaid, M., Abdan, K., & Ishak, M. R. (2018). The effect of silane treated fibre loading on mechanical properties of pineapple leaf/kenaf fibre filler phenolic composites. Journal of Polymers and the Environment, 26(4), 1520–1527.

Awwalu Usman, M., Danladi, S., & Idris, M. (2018). Effect of Groundnut Shell Powder on the Mechanical Properties of Recycled Polyethylene and Its Biodegradability. Scientific Research Publishing.

Ayrilmis, N., Kaymakci, A., & Ozdemir, F. (2019). Physical, mechanical, and thermal properties of polypropylene composites filled with walnut shell flour. Journal of Industrial and Engineering Chemistry, 70, 303–308.

Callister, W. D., & Rethwisch, D. G. (2018). Materials Science and Engineering: An Introduction. Wiley.

Hull, D., & Clyne, T. W. (2019). An Introduction to Composite Materials. Cambridge University Press.

Kamarudin, S. H., Ramli, A., & Yusoff, M. (2022). A Review on Natural Fiber Reinforced Polymer Composites: Processing, Properties and Applications. Polymers (MDPI).

Mittal, V. (2021). Interface engineering of natural fibre composites for maximum performance. Woodhead Publishing.

Mochane, M. J., Mokhena, T. C., Mokhothu, T. H., Mtibe, A., & Sadiku, E. R. (2021). Recent progress on natural fiber hybrid composites for advanced applications: A review. eXPRESS Polymer Letters, 15(2), 93–115.

Rahman, M. R., Hasan, M., & Huque, M. M. (2020). Influence of fiber treatment on the mechanical and morphological properties of sawdust reinforced polypropylene composites. Journal of Thermoplastic Composite Materials, 33(4), 503–520.

Rajak, D. K., Pagar, D. D., Menezes, P. L., & Linul, E. (2019). Fiber-reinforced polymer composites: Manufacturing, properties, and applications. Polymers, 11(10), 1667.

Singh, T., & Gupta, N. (2019). Effect of Particulate Biomass Filler on Mechanical Properties of Polymer Composites. Materials Today: Proceedings, 18, 1142–1150.

Soni, C., Patel, H., & Sharma, R. (2023). Sisal Fiber and Groundnut Shell Particulate Reinforced Hybrid Epoxy Composites: Mechanical and Tribological Properties. Materials Today: Proceedings (ScienceDirect).

Usman, M. A. (2021).Characterization of Groundnut Shell Powder as Reinforcement: XRD, FTIR, and Morphological Analysis. Journal of Reinforced Plastics and Composites (SAGE Journals).

Widodo, A., & Ilman, M. N. (2022). Pengaruh Frekuensi Getaran terhadap Sifat Fisis dan Mekanik pada Sambungan LAS MIG Alumnium Paduan AA 6061-T6. Jurnal Rekayasa Mesin, 13(1),171-178.

Wong, D., Abdullah, M., & Chee, C. (2024). Recent Developments in Natural Fiber–Reinforced Polymer Composites: Trends and Prospects. Composite Reviews (MDPI).

Downloads

Published

2026-04-05

How to Cite

Umam, S. J., Nabia, A. S., Rofiqiya, D., Verdianto, R., & Hikmah, U. (2026). ANALISIS PENGARUH VARIASI FRAKSI VOLUME SERBUK KULIT KACANG TANAH TERHADAP KEKUATAN TARIK KOMPOSIT MATRIKS POLIESTER. JOURNAL ONLINE OF PHYSICS, 11(2), 63–69. https://doi.org/10.22437/jop.v11i2.51825